Mașină cu blocuri de tigru
Low output of mobile brick making machine is a common headache for construction operators, which not only reduces work efficiency but also increases production costs. Many users ignore the impact of parameter settings on output, leading to underutilization of equipment performance. Even high-quality models like Tiger mobile brick making machine may have low output if parameters are improperly adjusted. To address this issue effectively, here are 5 key parameter adjustments that can significantly boost efficiency and solve the problem of low output.
Key Parameter Adjustment 1: Optimize Molding Pressure
First and foremost, adjust the molding pressure, as it is one of the most critical factors affecting output. Insufficient pressure leads to loose brick blanks and slow molding speed, while excessive pressure, on the other hand, increases energy consumption and damages the mold. For most mobile brick making machines, setting the pressure between 25-35 MPa is optimal, which ensures compact blanks and fast molding, thereby laying a solid foundation for high output.
Key Parameter Adjustment 2: Fine-Tune Vibration Parameters
Next, optimize the vibration parameters, since vibration frequency and time directly affect material compaction. Specifically, adjust the frequency to 3800-4500 Hz and vibration time to 15-20 seconds; this adjustment helps eliminate air bubbles in materials and improve molding efficiency. Importantly, this feature is well-supported by Tiger’s advanced vibration system, which enhances the effectiveness of the adjustment.
Key Parameter Adjustment 3: Control Material Moisture Properly
In addition to pressure and vibration, controlling material moisture is equally essential. Too high moisture causes sticking to the mold, which slows down the production process, while too low moisture leads to poor compaction and substandard brick quality. Therefore, maintaining moisture at 10%-15% is crucial to ensure smooth feeding and molding, thus avoiding unnecessary delays.
Key Parameter Adjustment 4: Adjust Feeding Speed Reasonably
Furthermore, adjust the feeding speed to match the equipment’s working rhythm. Uneven or too slow feeding causes mold underfilling, which reduces output per cycle, while too fast feeding leads to material waste and potential equipment jams. By matching the feeding speed with the molding cycle, you can achieve continuous and stable production, further boosting overall efficiency.
Key Parameter Adjustment 5: Inspect and Adjust Mold Gap Regularly
Finally, check and adjust the mold gap regularly, as worn or improperly adjusted molds often cause material leakage and uneven brick sizes. These issues not only affect product quality but also require rework, which wastes time and reduces output. Regularly inspecting and adjusting the mold gap ensures consistent product quality and avoids rework, thereby maintaining high production efficiency.
Conclusion: Unlock the Potential of Your Mobile Brick Machine
In summary, by adjusting these five key parameters, you can fully tap the potential of your mobile brick making machine. Specifically, Tiger mobile brick making machine, with its precise parameter adjustment function, can achieve higher output and better efficiency after reasonable setting, ultimately bringing more benefits to your construction projects.
